References

The scientific publications listed below underpin the models implemented in GHE Analysis.

  1. Ahmadfard, M., Bernier, M., 2018. Modifications to ASHRAE's sizing method for vertical ground heat exchangers. Science and Technology for the Built Environment 24, 803–817. ↩
  2. Claesson, J., Hellström, G., 2011. Multipole method to calculate borehole thermal resistances in a borehole heat exchanger. HVAC&R Research 17(6), 895–911. ↩
  3. Claesson, J., Javed, S., 2018. Explicit multipole formulas for calculating thermal resistance of single U-tube ground heat exchangers. Energies 11(1), 214. ↩
  4. Claesson, J., Javed, S., 2019. Explicit multipole formulas and thermal network models for calculating thermal resistances of double U-pipe borehole heat exchangers. Science and Technology for the Built Environment 25(8), 980–992. ↩
  5. Dion, G., Pasquier, P., Perraudin, D., 2017. Sizing equation based on the outlet fluid temperature of closed-loop ground heat exchangers. Proceedings of the International Ground Source Heat Pump Association Conference. ↩
  6. Dusseault, B., Pasquier, P., Marcotte, D., 2018. A block matrix formulation for efficient g-function construction. Renewable Energy 121, 249–260. ↩
  7. Eskilson, P., 1987. Thermal Analysis of Heat Extraction Boreholes. Doctoral Thesis, University of Lund, Sweden. ↩
  8. Fuentes, E., Waddicor, D., Salom, J., 2016. Improved characterization of water-to-water heat pumps part load performance. REHVA Journal, August 2016, pp. 45–49. ↩
  9. Guo, Y., Hu, X., Banks, J., Liu, W.V., 2020. Considering buried depth in the moving finite line source model for vertical borehole heat exchangers. Energy & Buildings 214, 109859. ↩
  10. Kavanaugh, S.P., Rafferty, K., 1997. Ground-Source Heat Pumps: Design of Geothermal Systems for Commercial and Institutional Buildings. American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Atlanta, GA. ↩
  11. Javed, S., Spitler, J.D., 2017. Accuracy of borehole thermal resistance calculation methods for grouted single U-tube ground heat exchangers. Applied Energy 187, 790–806. ↩
  12. Lamarche, L., 2023. Fundamentals of Geothermal Heat Pump Systems. Vol. 295. Springer, Cham, XIII + 295 pp. ↩
  13. Marcotte, D., Pasquier, P., 2008a. Fast fluid and ground temperature computation for geothermal ground-loop heat exchanger systems. Geothermics 37(6), 651–665. ↩
  14. Marcotte, D., Pasquier, P., 2008b. On the estimation of thermal resistance in borehole thermal conductivity test. Renewable Energy 33(11), 2407–2415. ↩
  15. Marcotte, D., Pasquier, P., 2009. The effect of borehole inclination on fluid and ground temperature for GLHE systems. Geothermics 38(4), 392–398. ↩
  16. Marcotte, D., Pasquier, P., Sheriff, F., Bernier, M., 2010. The importance of axial effects for borehole design of geothermal heat-pump systems. Renewable Energy 35(4), 763–770. ↩
  17. Marcotte, D., Pasquier, P., 2014b. Unit-response function for ground heat exchanger with parallel, series or mixed borehole arrangement. Renewable Energy 68, 14–24. ↩
  18. Nguyen, A., Pasquier, P., Marcotte, D., 2015a. Influence of groundwater flow in fractured aquifers on standing column wells performance. Geothermics 58, 39–48. ↩
  19. Nguyen, A., Pasquier, P., Marcotte, D., 2015b. Thermal resistance and capacity model for standing column wells operating under a bleed control. Renewable Energy 76, 743–756. ↩
  20. Nguyen, A., Pasquier, P., 2021. A successive flux estimation method for rapid g-function construction of small to large-scale ground heat exchangers. Renewable Energy 165, 359–368. ↩
  21. Nguyen, A., Jacques, L., Pasquier, P., 2025. An easy-to-use analytical model for standing column wells operating with bleed. Applied Thermal Engineering 258, 124543. ↩
  22. Pasquier, P., Marcotte, D., Bernier, M., Kummert, M., 2013. Simulation of ground-coupled heat pump systems using a spectral approach. In: Proceedings of the 13th Conference of IBPSA, Chambéry, France, pp. 2691–2698. ↩
  23. Pasquier, P., Marcotte, D., 2013b. Efficient computation of heat flux signals to ensure the reproduction of prescribed temperatures at several interacting heat sources. Applied Thermal Engineering 59, 515–526. ↩
  24. Pasquier, P., Marcotte, D., 2014. Joint use of quasi-3D response model and spectral method to simulate borehole heat exchanger. Geothermics 51, 281–299. ↩
  25. Pasquier, P., 2018. Interpretation of the first hours of a thermal response test using the time derivative of the temperature. Applied Energy 213, 56–75. ↩
  26. Pasquier, P., Lamarche, L., 2022. Analytic expressions for the moving infinite line source model. Geothermics 103, 102413. ↩
  27. Waples, D.W., Waples, J.S., 2004. A Review and Evaluation of Specific Heat Capacities of Rocks, Minerals, and Subsurface Fluids. Part 1: Minerals and Nonporous Rocks. Natural Resources Research 13, 97–122. ↩